1 shl connector 1.0mm pitch/disconnectable crimp style connectors emboss tape header outline ? 1 $ c p b s e header outline normal type offset type sshl-003t-p0.2 ? ? ?
material and finish model no. applicable wire q'ty / reel mm 2 awg# insulation o.d. (mm) phosphor bronze, tin-plated (reflow treatment) $ p o u b d u $ s j n q j o h n b d i j o f ap-k2n mks-l-10-3 mks-sc mk/ssh/l-003-02 sc/ssh/l-003-02 " q q m j d b u p s $ s j n q b q q m j d b u p s % j f t aplmk ssh/l003-02 aplsc ssh/l003-02 $ s j n q b q q m j d b u p s x j u i e j f t sshl-003t-p0.2 ?thin design ?low insertion force ?deformation preventive design specifications ?current rating: 1.0a ac, dc (awg #28) ?voltage rating: 50v ac, dc ?temperature range: - 25?c to + 85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/20m ? max. after environmental testing/40m ? max. ?insulation resistance: 100m ? min. ?withstanding voltage: 500v ac/minute ?applicable wire: awg #32 to #28 * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 pc board layout (viewed from component side) and assembly layout note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. contact rohs compliance note: contact jst for gold-plated products. note: *strip-crimp applicator contact jst for applicable wires in case that it is not usable due to wire size.
2 shl connector " # marking by every 5 circuit circuit no.1 mark a b material 1.0 4.0 5.0 6.0 7.0 9.0 10.0 11.0 13.0 15.0 19.0 21.0 25.0 29.0 4.6 7.6 8.6 9.6 10.6 12.6 13.6 14.6 16.6 18.6 22.6 24.6 28.6 32.6 6,000 3,000 3,000 3,000 3,000 2,000 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 2 5 6 7 8 10 11 12 14 16 20 22 26 30 shlp-02v-s-b shlp-05v-s-b shlp-06v-s-b shlp-07v-s-b shlp-08v-s-b shlp-10v-s-b shlp-11v-s-b shlp-12v-s-b shlp-14v-s-b shlp-16v-s-b shlp-20v-s-b shlp-22v-s-b SHLP-26V-S-B shlp-30v-s-b pbt, ul94v-0, natural (white) circuits model no. dimensions (mm) with protrusions q'ty / box # " circuit no.1 # " circuit no.1 normal type offset type material and finish contact: phosphor bronze, copper-undercoated, tin-plated (reflow treatment) housing: pa, ul94v-0, natural (ivory) solder tab: brass, copper-undercoated, tin-plated (reflow treatment) 2 5 6 7 8 10 11 12 14 16 20 22 26 30 sm02b-shls-tf sm05b-shls-tf sm06b-shls-tf sm07b-shls-tf sm08b-shls-tf sm10b-shls-tf sm11b-shls-tf sm12b-shls-tf sm14b-shls-tf sm16b-shls-tf sm20b-shls-tf sm22b-shls-tf sm26b-shls-tf sm30b-shls-tf 1.0 4.0 5.0 6.0 7.0 9.0 10.0 11.0 13.0 15.0 19.0 21.0 25.0 29.0 4.8 7.8 8.8 9.8 10.8 12.8 13.8 14.8 16.8 18.8 22.8 24.8 28.8 32.8 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 4,500 ab circuits q'ty / reel insulation o.d. (mm) model no. normal type normal type sm14b-shls-1-tf sm20b-shls-1-tf 13.0 19.0 18.0 24.0 offset type offset type ab housing rohs compliance shrouded header rohs compliance this product displays (lf)(sn) on a label. note: contact jst for the headers with gold-plated pins.
|
